Vision core :: general operating instructions & modes chart

pop'n flow full vision modular system video playlist
Welcome to your new pop'n flow full vision prop! Please refer to the specific instructional video below depending on which prop/hub you're using:  ...
Thu, 29 Feb, 2024 at 7:14 PM
vision props :: general operating instructions
All vision props have the flowOS operating system that is housed in other flowtoys - you learn one, you learn them all, and they can all be connected to eac...
Sun, 16 Feb, 2020 at 9:36 AM
vision core :: modes table, adjust parameters & kinetic responses
Click here to update your firmware to the newest version. It's free, fixes some common issues, and has all the most awesome new features - like being...
Mon, 14 Nov, 2022 at 7:21 PM
vision poi, chucks, dart, staffs, wand :: how to charge
To charge the vision poi/chucks/dart/staff, you will need to remove the flowcap at the end of the tube.  To remove the flowcap, twist and pull it off the ...
Thu, 10 Feb, 2022 at 4:41 PM
vision sabers :: how to charge
As of January 2024 all vision sabers are built with the USB port/button on the flowcap side of the blade. We've included a video below that shows how to...
Tue, 30 Jan, 2024 at 1:50 PM
vision sticks :: how to charge/adjust leash length
Below is a video that shows how to charge your vision sticks as well as adjust the leash length. If you have any questions or need any help along the way, p...
Mon, 10 Aug, 2020 at 3:28 PM
vision core :: how to reset
A vision core reset should only be performed if the core is completely unresponsive both on and off the charger, or it is not showing up on the firmware upd...
Sat, 7 Nov, 2020 at 1:20 PM
vision clubs :: swapping out club bodies, handles, knobs & caps
Club bodies, handles and other parts wear down with use. Our warranty doesn't cover free replacements on wear and tear, but each part is $5-10, and you ...
Thu, 5 Nov, 2020 at 1:57 PM