Tube connectors are used in our collapsible staffs to join each section together. 

  • To attach, insert the staff connector into a tube, twist until connector buttons click into the holes securely.
  • To detach, twist the tubes in opposite directions to disengage the buttons from the holes then pull. 


Pro tip: One way to make it easier to install/remove the tube connectors is to line the inside of the tube with lubricant (lip balm or petroleum jelly both work well). Be sure to only add a TINY bit to the inside of the tubes, since all you need is a microscopic layer between the tube and connector. 


If you have black carbon fiber tube connectors in your staff, check out this video:




If you have older, clear plastic tube connectors, refer to the video below.


Do note, the buttons are slightly sloped in one direction and twisting one way will release one half of the connector, while twisting the other way releases the other half. Try not to twist them out the wrong way as this can weaken the part. It is easier to feel the correct way when twisting the tube, than to see it.



If you have any questions, please feel free to contact us!