*Note: As of late 2017, all podpoi come standard with knob handles, instead of floops with swivels.
*Note: As of end 2019, all flowtoys poi come standard with smithy cord, instead of flowcord.
You can turn your podpoi into a meteor one of two ways:
- Quick 'n easy way: If your podpoi have floop handles, you can connect the handles, i.e. thread one floop handle through another, then thread the poi head through the first floop handle.
- If you'd like to add floop handles to your podpoi rig, we offer flowleash plus rigs on our site here: https://flowtoys.com/flowleash-plus
- You can check it out in this inspiring video by our friend Thomas. This is quick and easy, but not the ideal setup for a dedicated meteor, as you'll have swivels near the middle.
- What we recommend for a smoother, dedicated meteor: Use a length of cord to connect your podpoi heads.
- get cord: https://flowtoys.com/parts-1/cord-parts
- add leash washers to each end: https://flowtoys.com/leash-washer
- find your desired length - but don't cut it yet!
- tie knots in the ends RIGHT at your preferred length
- then cut and melt the knots to secure them
- roll o-rings and tri-rings over the freshly made cord - be sure your tri-rings are correctly oriented
- insert the knots and washers into your capsule lights, and then assemble the rest
You can also purchase a pod meteor set-up, and replace the meteor leash with a pair of knob leashes when you wish to spin poi. Here's a link to the pod meteor. The leashes are pretty easily interchangeable :)
Please feel free to contact us if you have any questions: support@flowtoys.com