Crystal poi lite is designed create a more glowsticking-style poi than its predecessor the crystal poi. It's more streamlined with no knots or hardware, and uses a special "J-lace" leash that's great for stringing/glowsticking.   


You can use a chopstick or a loop of string to help thread the J-lace through the hole in the modified crystal case. Here's how: 




If you want to use flowleash plus w/ smithy cord with crystal poi lite, here's how to swap the j-lace:

You will need:

  • a razor knife
  • a cutting surface
  • lighter
  • flowleash plus (comes w/ o-rings) or smithy cord and large welded o-rings


Here's how to swap the j-lace to smithy: 

  • pull the flowlight out of the crystal case, remove the j-lace from the flowlight 
  • using a sharp razor blade, cut about 1/8 inch off the tip of the crystal case --> this will expose a larger hole to make fitting the smithy super easy
  • feed your smithy cord thru the hole in the crystal case 
  • slip the large welded o-ring onto the end of the smithy cord
  • feed the smithy cord thru the square end of your flowlight
  • feed the cord through the o-ring
  • cut the excess cord, melt the end to form a puck to finish the end of the cord
  • pull the flowlight back into the crystal case - make sure the flowlight button lines up with one of the button features on the crystal case
  • enjoy your poi!