flowOS 2.0 modes are mapped to your specific vision props. If you have vision poi, you'll want to upload the right firmware, as using the vision poi XL firmware will mean that half the pattern will not be visible in the shorter poi circuit board.


Refer to the table below for the pixel count/firmware version for standard vision props.


If you have a non-standard vision props, here how to find the correct pixel count for your prop:

  • turn on your prop + count the number of pixels down the length
  • for staffs/batons/wands, it is half the total pixels
  • only count 1 column of LEDs down the length
  • don't count every LED around the prop, as there are 2-4 LEDs per pixel


Standard Vision PropsFirmwarePixel Count
Poi

vision sticks/freehandspin99
vision poi - spin9spin99
vision poi - spin16spin1616
pop'n flow poi :: full visionspin18
18
vision poi XL
spin3030



Darts/Chucks

vision dart - spin9spin99
vision dart - spin16spin1616
vision chucksspin1616
pop'n flow dart/chucks :: full visionspin1818



Staffs/Wands/Batons


vision contact staffspin1616
vision contact staff XLspin3232
pop'n flow contact staff :: full visionspin1818
vision lumina twirl batonspin9
9
vision contact wand
spin9
9
vision flower stick
spin9
9



Sabers

vision contact saberspin3232
vision flow saberspin4040
vision martial saberspin4040



Full Vision Props

Contact Wands/Dance wands/Flowersticks/Batons


67cm/26.2"spin2121
70cm/27.4"spin2222
73cm/28.6"spin23
23
76cm/29.8"
spin24
24
78cm/30.9"
spin25
25



Staffs

67cm/26.2"
spin2121
70cm/27.4"spin2222
73cm/28.6"
spin23
23
76cm/29.8"spin2424
78cm/30.9"
spin2525
82cm/32.1"spin2626
85cm/33.3"spin27
27
88cm/34.4"spin2828
90cm/35.6"spin2929
93cm/36.8"spin3030
96cm/38"spin3131
100cm/39.2"spin32
32
103cm/40.4"spin3333
106cm/41.5"spin3434
109cm/42.7"spin3535
112cm/43.9"spin3636
115cm/45.1"spin3737
118cm/46.3spin3838
120cm/47.4"
spin3939
123cm/48.5"spin4040