These instructions apply to capsule 1 NOT capsule 2.0.
Here are some terms we use to describe the capsule light’s features:
Mode = one of the 13 adjustable modes the capsules can be in
Adjustment = a variation of color/speed in any given mode
Pattern = Mode + Adjustment
Since each mode is adjustable and some have multiple patterns, these are important distinctions.
To adjust a mode:
Hold the button down for about half a second. Let go when you see it blink white once - it will start adjusting the mode you are in.
(Note: If you hold the button down for over a second and it blinks 2 times, the capsule will fade and power off.)
To access presets:
Go to the 11th mode (Presets, just after Strobe) and adjust it. It will start cycling through the preset patterns and they will be very obviously different.
To stop on a preset mode, press the button once (short press).
To continue moving through presets, press the button until it blinks to enter adjust again - the preset modes will continue to cycle.
For more information about capsule lights, check out this video:
If you have any questions, please feel free to contact us!