All flowtoys tubing-based props like batons, staffs, chucks, darts, flower sticks and tubing-based poi have a "flowcap" securing your lights inside the protective tubes.
To charge the "capsule lights" in lumina twirl batons and other tubing-based props, you will need to:
- twist the soft silicone cap off the hard polycarbonate tube
- pull both the cap and capsule light unit out of the tube
- detach the flowcap from the capsule light to access the charging port
- plug your usb cable into your capsule light (see micro-usb charging port in picture below) and make sure your cable is plugged into a power source - your capsule light should light up while charging
Red = really low, less than 10% left
Orange = okay, about 50% left
Yellow = should last a while, 50-90%
Green = good to go! 90% or more
To charge the vision props, you will need to:
- twist the soft silicone cap off the hard polycarbonate tube
- you'll see the usb charging port at the end of the vision circuit board
- plug your usb cable into the charging port and make sure your cable is plugged into a power source
If you're having trouble removing the flowcap from the tube, here are videos with tips:
We hope this helps, and if you have any questions please contact us and we will do our best to help out.