All flowtoys tubing-based props like batons, staffs, chucks, darts, flower sticks and tubing-based poi have a "flowcap" securing your lights inside the protective tubes.


To charge the "capsule lights" in lumina twirl batons and other tubing-based props, you will need to:

  1. twist the soft silicone cap off the hard polycarbonate tube
  2. pull both the cap and capsule light unit out of the tube
  3. detach the flowcap from the capsule light to access the charging port
  4. plug your usb cable into your capsule light (see micro-usb charging port in picture below) and make sure your cable is plugged into a power source - your capsule light should light up while charging




To charge the vision props, you will need to:

  1. twist the soft silicone cap off the hard polycarbonate tube
  2. you'll see the usb charging port at the end of the vision circuit board 
  3. plug your usb cable into the charging port and make sure your cable is plugged into a power source



If you're having trouble removing the flowcap from the tube, here are videos with tips:   


 

 


We hope this helps, and if you have any questions please contact us and we will do our best to help out.