We build most of our staffs so that each end tube is filled entirely with light - this applies to flowlight, capsule and vision based staffs.
If you'd like to add more light to the staffs below, here's how:
Composite staffs: Typically composite staffs are built with 2FX or 2CX tubes - these fit 2x flowlights or 2x capsule lights at each end. You can get longer tubes for each staff end to hold more lights, though this increases the overall length of your staff.
Collapsible staffs: These have 3.5F tubes on each end. You can fit up to 3x flowlights and up to 2x capsule lights in each staff end. You can get longer end tubes for your collapsible staffs here.
You can add more capsule lights to a collapsible staff end tube, but they will slide around inside the tube as they are not attached to each other.
1-piece staffs (martial/contact): The wood cores in the shaft are sized specifically to fit a specific amount of lights at each end. If you'd like to add more lights to a staff that's already been built, please contact us.
Vision staffs: Each end is filled entirely with light. We do have vision cores in varying lengths, so depending on what you're looking for, we may be able to make it happen. Just let us know what you're interested in and we'll do our best to help :)
If you have any questions, feel free to contact us.