If you got your staff after 2025, it was built with pop socket adaptors making it very easy to install/remove the tubes from the shaft.
Check out this support page for details on how the pop socket adaptors work: https://flowtoys2.freshdesk.com/support/solutions/articles/6000185478-how-to-break-down-a-vision-composite-staff-for-travel
If you got your staff before 2025 it was built with screw-in tube adaptors. Check out the information below to see how those parts work.
The first video below covers how the tube adaptors on your composite/collapsible staff work, as well as tube removal tips.
The second video covers how to remove/replace tube adaptors in case you'd like to replace your grip or shorten the shaft.
If you have any questions after checking out these videos, please feel free to contact us.
How to :: tube adaptors
How to :: replace tube adaptors
Tools you’ll need: #1 Phillips screwdriver, handheld or electric
Step by step instructions:
0:25 Use #1 Phillips screwdriver to remove screws
1:42 Twist and pull to remove the adaptor. Now you may cut down your staff or replace grip :)
3:07 Fit adaptor back on the shaft
3:12 Alignment options
3:43 Pound staff adaptor-side down into the ground
4:10 Drill in screws
5:32 Reinstall tube onto adaptor
If you need to replace the grip on your shaft, check out this support page for more information: https://flowtoys2.freshdesk.com/support/solutions/articles/2179-how-to-installing-12mm-15mm-and-1-elastomer-grip-tubing