Welcome to your flowtoys staff!
The first video below covers how the tube adaptors on your composite/collapsible staff work, as well as tube removal tips.
The second video covers how to remove/replace tube adaptors in case you'd like to replace your grip or shorten the shaft.
If you have any questions after checking out these videos, please feel free to contact us.
How to :: tube adaptors
How to :: replace tube adaptors
Tools you’ll need: #1 Phillips screwdriver, handheld or electric
Step by step instructions:
0:25 Use #1 Phillips screwdriver to remove screws
1:42 Twist and pull to remove the adaptor. Now you may cut down your staff or replace grip :)
3:07 Fit adaptor back on the shaft
3:12 Alignment options
3:43 Pound staff adaptor-side down into the ground
4:10 Drill in screws
5:32 Reinstall tube onto adaptor
If you need to replace the grip on your shaft, check out this support page for more information: https://flowtoys2.freshdesk.com/support/solutions/articles/2179-how-to-installing-12mm-15mm-and-1-elastomer-grip-tubing