Welcome to your new Flowbonacci dragon staff! Get ready to let the good times roll ;) This page includes 2 videos to help you get started with your new dragon staff.
The Flowbonacci collapsible staff shaft - how does it work?
- collapsible shaft design (:18)
- shaft diameter and length options - do note, the length options mentioned in this video do not reflect the options listed on our site! (:44)
- maintenance tips (1:20)
Do note, as of April 2025 we started installing nimbus grip on the flowbonacci shafts.
With the nimbus grip, the extra squishiness makes the shaft buttons a little harder to press than with the goat grip. We've included some disassembly tips that will help preserve the grip and your fingers ;)
- using the corner of your finger/the part at the joint, where your fingers are harder
- using anything hard to press against the button: carabiner, the hex key that comes with the dragons, even a keyring
What to avoid: using your fingernail to press the button on the shaft. This may end up deforming/puncturing the grip around the button connector.
Flowbonacci plug hub assembly/installation instructions
- plug hub compatibility (:15)
- attaching the plug hub to a Flowbonacci dragon head (:25)
- attaching plug hub to staff shaft (:55)
- tightening the plug hub screws (1:06)
- tips for attaching the plug hub to the staff shaft (1:19)
Using your Flowbonacci shaft with flowtoys LED dragon hubs
You may already know, the Flowbonacci shafts are compatible with our trikon and pop'n flow dragon heads! If you'd like to get LED hubs to add to your staff, we offer them on our site here: https://flowtoys.com/props/staffs/dragon
If you need help or have any questions, please feel free to contact us! Keep spinning and have fun!