These instructions apply to capsule 2.0 lights and vision props. 


Make sure your firmware is up to date! We’ve made significant changes, improvements and bug fixes for most radio issues for capsule 2.0 & vision props. All your vision and capsule 2.0 props need to have the same firmware version to connect to each other, have the same modes, brightness and run-time, so make sure to update the firmware on all your props!

You can adjust a mode, or Page 5 setting like brightness or white balance on 1 light without affecting the rest of group.


To control a single/solo light, or partial group of lights:

  • "Solo on" just the light/s you want to change, or "solo off" the ones you don't.


To "Solo on and solo off": 

  • Long-hold for ~4 seconds. 
  • From ON → Hold past the adjust and off indicators, a third indicator (fade-off #2) lets you know you can let go. If the light is grouped with other lights, it alone will turn off and the rest of the group will stay on.
  • From OFF →  hold past charge level, until light is on - the rest of the group will remain off.
  • You can let go as soon as the fade-off/on indicator begins.