Flowtoys

These instructions apply to both capsule 2.0 and vision core lights.

As of flowOS 2.6, there’s a new kinetic response options in Page5/settings, in case you would like to force all the modes to stay in their static form even when being manipulated.

Adjusting kinetic response is an advanced feature that requires you to understand the basic button presses of flowOS. You will need to know how to:

• "Page click" to get to the settings page
• "Press" to navigate and select settings
• "Long press" to adjust your setting
• "Hold to save"

If you are not already familiar with these button presses, please refer to this button press guide.

If you'd like to check out a mode chart for the vision and capsule 2 lights, we have them linked below. They include the kinetic response parameters too!

• capsule 2.0 mode chart
• vision mode chart

Make sure your firmware is up to date! We’ve made significant changes, improvements and bug fixes for most radio issues for capsule 2.0 & vision props. All your vision and capsule 2.0 props need to have the same firmware version to connect to each other, have the same modes, brightness and run-time, so make sure to update the firmware on all your props!

• Click here to download and install the new firmware update