Staffs & batons :: contact, twirling, dragon, martial, juggling, travel/collapsible, cane and more
How to assemble, disassemble staffs, and all other hardware questions. For how to use lights, please refer to the relevant light engine category.
Typically, the best length for a contact staff is to measure the distance from the ground to just below your chin. This way, the staff won't hit the...
Tue, 17 Feb, 2026 at 1:53 PM
Both baton options are made of the same material (carbon fiber shaft with polycarbonate end tubes), and they both hold 1 capsule light at each end. ...
Wed, 4 Feb, 2026 at 4:40 PM
This combination does not work well for everyone, for 2 main reasons: Roll: The shaft diameter of a dragon staff makes a huge difference on how fast i...
Wed, 4 Feb, 2026 at 4:46 PM
The goal is to be able to push on the edge of flowmass without squeezing the mass, as this causes the mass to tighten more. If you can find a piece of tub...
Wed, 4 Feb, 2026 at 4:46 PM
Nimbus grip is silicone and very fire resistant. The Gaffers tape that we use to finish it in-house is fairly fire resistant as well, but there may be situa...
Wed, 4 Feb, 2026 at 4:48 PM
As of Oct 2025: When installed at flowtoys, we pre-texture the grip with 60 grit sandpaper on a random-orbit sander. Nimbus grip is a great option for a...
Wed, 4 Feb, 2026 at 4:53 PM
Here is a video that shows how to install nimbus/gravity grip. If you have any questions or need any help along the way, please feel free to contact us...
Wed, 4 Feb, 2026 at 4:47 PM
While we can't confirm whether or not you will react to the elastomer grip, the company who makes our grip tubing developed it as an alternative to sili...
Tue, 4 Mar, 2025 at 4:27 PM
Maybe you decided you'd like your composite contact staff, lumina twirl baton or composite flower stick to be a little shorter. Good news is you can cut...
Wed, 4 Feb, 2026 at 5:14 PM
NOTE: As of 2020, we switched to new connectors that screw into the carbon fiber shaft, and also have tabs on them that connect with the holes in e...
Mon, 19 Feb, 2024 at 11:47 PM