Staffs & batons :: contact, twirling, dragon, martial, juggling, travel/collapsible, cane and more
How to assemble, disassemble staffs, and all other hardware questions. For how to use lights, please refer to the relevant light engine category.
If you like your staff on the heavier side, we offer a couple options for you to easily add weight to the ends - where it matters :) flowmass (20.8g) flo...
Wed, 4 Feb, 2026 at 4:12 PM
Flowmass is slightly tapered with more material on one end - make sure the heavier end is installed at the far end of your prop, where it counts. To ad...
Wed, 4 Feb, 2026 at 4:13 PM
Flowers slow your prop’s rotation and add weight, changing the handling dramatically. They are a great addition to any stick-based prop! Our flowers are ma...
Wed, 4 Feb, 2026 at 4:13 PM
If you got your staff after 2025, it was built with pop socket adaptors making it very easy to install/remove the tubes from the shaft. Check out this ...
Wed, 4 Feb, 2026 at 4:22 PM
If you have a flowtoys staff and would like to use your lights to make LED poi or other props, here are your options: Pop'n flow staffs - We offer ...
Wed, 4 Feb, 2026 at 4:35 PM
After extensive testing of liquids ranging from denatured alcohol to water-based personal lubricants, including shampoo, hair gel and more, we have found wh...
Wed, 4 Feb, 2026 at 4:35 PM
We use the elastomer wrap grip for these products: 22mm full vision staffs full vision contact wands However, you can use the elastomer wrap grip ki...
Wed, 4 Feb, 2026 at 4:36 PM
Grip can wear out with use (kinda like shoes), and we have a couple options to help you keep your grip fresh and tacky. A tip and a good idea: Grip i...
Wed, 4 Feb, 2026 at 4:36 PM
Flowlights and capsule can easily be swapped between props. Vision cores can be transferred with significant effort. Definitely worth it when upgrading f...
Tue, 22 Mar, 2022 at 3:02 PM
The most appropriate length for a dragon staff is the distance from the ground to around mouth/nose level. This refers to the length of the shaft itself to ...
Tue, 10 Feb, 2026 at 1:25 PM