Capsule 2.0 & vision core :: troubleshooting, tips & FAQ

how to: reset capsule 2.0 or vision light core
Here are instructions on how to reset:  capsule 2.0 vision light core (scroll down) how to reset: capsule 2.0 Your capsule light is a little comput...
Wed, 11 Nov, 2020 at 4:28 PM
how to: check usb jack, cable or charger
Sometimes a faulty USB jack, cable or charger could be the cause of trouble. The easiest way to test the cable and charger is with a light that you know...
Fri, 11 Feb, 2022 at 4:16 PM
how to: maximize runtime and extend battery life
Some modes use more power than others. Brighter modes and solid modes that don't strobe use more power. Check out the modes charts for details: capsul...
Fri, 11 Feb, 2022 at 4:18 PM
how to: check battery wires & connector - capsule & vision
If your light turns on ONLY on USB, or if it sometimes turns off on impact, there might be a loose contact between the battery wire and the circuit board. ...
Fri, 11 Dec, 2020 at 11:59 AM
troubleshooting :: how to DIY glue your vision club shaft together
If your vision club shaft comes apart (the plastic housing that contains the vision core), that's a defect and we will replace the shaft for free. Pleas...
Thu, 22 Feb, 2024 at 2:05 PM
troubleshooting :: i'm having trouble grouping, or my lights are no longer grouped - capsule & vision
The "flowtoys connect" radio protocol has been significantly improved since it was first released in 2018, and as of firmware version 2.4 (release...
Wed, 11 Nov, 2020 at 6:32 PM
troubleshooting :: my batteries seem to drain quickly - capsule & vision
Make sure your firmware is up to date! We’ve made significant changes, improvements and bug fixes for most radio issues for capsule 2.0 & vision props. ...
Fri, 11 Feb, 2022 at 4:24 PM
troubleshooting :: light doesn't turn on, stuck on, only turns on when plugged in, turns off on impact etc. - capsule & vision
Make sure your firmware is up to date! We’ve made significant changes, improvements and bug fixes for most radio issues for capsule 2.0 & vision props. ...
Wed, 14 Feb, 2024 at 3:55 PM
troubleshooting: button is hard to press - capsule & vision
If your button is hard to press, it could be due to the button hardware being improperly assembled or broken, or due to dirt or corrosion or damage.  If t...
Tue, 15 Feb, 2022 at 3:47 PM
troubleshooting: accelerometer/kinetic response is funky - capsule 2.0 & vision
Make sure your firmware is up to date! We’ve made significant changes, improvements and bug fixes for most radio issues for capsule 2.0 & vision props. ...
Tue, 15 Feb, 2022 at 3:48 PM